SIC codes

Discover and Understand John Deere SIC Fault Codes

John Deere SIC fault codes, also known as John Deere SIC diagnostic trouble codes, are critical for maintaining the optimal performance of your agricultural machinery. These codes are generated by the SIC Control Unit, which manages the Selective Control Valves (ESCVs/EICVs) on John Deere equipment. Understanding these error codes can help diagnose and resolve issues quickly, ensuring minimal downtime and maximum efficiency.

What are John Deere SIC Fault Codes?

John Deere SIC fault codes are diagnostic messages generated by the SIC control unit to indicate malfunctions or abnormalities in the equipment’s operation. These codes help operators and technicians identify specific problems within the ESCV (Electro-Hydraulic Section Control Valve) and EICV (Electro-Hydraulic Integrated Control Valve) systems.

Where Do These Codes Occur?

These codes commonly occur in John Deere tractors, harvesters, and other machinery equipped with ESCVs and EICVs. The SIC control unit monitors these valves and generates fault codes when it detects issues such as voltage irregularities, temperature extremes, or communication errors.

Common John Deere SIC Fault Codes

Here are five of the most common John Deere SIC error codes, where they occur, and what they mean:

  1. SIC 523890.00 – A36 Stepper Motor ESCV 1, Supply Voltage Out of Valid Range High
    • Occurrence: Typically seen in tractors with front-end implements.
    • Meaning: Indicates the system voltage at the stepper motor of ESCV 1 exceeds 16 volts, potentially causing erratic operation or failure.
  2. SIC 523891.01 – A37 Stepper Motor ESCV 2, Supply Voltage Out of Valid Range Low
    • Occurrence: Found in various John Deere machinery.
    • Meaning: The system voltage at the stepper motor of ESCV 2 is less than 9 volts, leading to insufficient power for proper operation.
  3. SIC 523892.00 – A38 Stepper Motor ESCV 3, Supply Voltage Out of Valid Range High
    • Occurrence: Common in equipment with advanced hydraulic systems.
    • Meaning: Voltage at the stepper motor of ESCV 3 exceeds 16 volts, indicating a risk of damage due to overvoltage.
  4. SIC 523895.31 – S91 Control Lever (Potentiometer or Switch) for ESCV 1, Faulty
    • Occurrence: Occurs in tractors and machinery with selective control valve systems.
    • Meaning: Potentiometer signal voltage for ESCV 1 control lever is incorrect, or the switch status does not match the potentiometer signal.
  5. SIC 600006.31 – Diagnostic Trouble Code Not Known
    • Occurrence: Seen across various John Deere models.
    • Meaning: An unknown diagnostic trouble code received via CAN BUS, indicating a possible issue not stored in the DTI memory.

Why Understanding These Codes is Important

Understanding John Deere SIC diagnostic trouble codes is crucial for:

  • Efficient Troubleshooting: Quickly identifying and resolving issues to minimize downtime.
  • Preventive Maintenance: Regularly monitoring these codes to maintain optimal machinery performance.
  • Cost Savings: Avoiding extensive repairs by addressing problems early.

Keep your John Deere machinery running smoothly by staying informed about SIC fault codes and their implications. Regular maintenance and timely troubleshooting can significantly enhance the longevity and efficiency of your equipment.

John Deere Parts
John Deere Logo