VTV codes

Comprehensive Guide to John Deere VTV Error Codes

John Deere VTV Error Codes, also known as VTV Fault Codes, are essential for diagnosing issues within the VTI control software located in the processor of John Deere machinery. These codes help identify specific problems in the CommandCenter™, which displays various tractor functions and settings. Understanding these codes is crucial for maintaining and troubleshooting John Deere equipment.

Location of VTI Control Software:

  • Processor: Located behind the operator’s seat.
  • Display (CommandCenter™): Positioned on the right side of the driver.

Important Note: The CommandCenter™ (VTI) will not connect to the CAN Bus if a GreenStar™ Display is connected. To access diagnostic trouble codes related to the CommandCenter™, the GreenStar™ Display must be disconnected from the CAN Bus.

John Deere VTV Fault Codes List

1. VTV 000158.03 – Supply Voltage (ELX) Too High

  • Description: Supply voltage above 16V.
  • Location: Processor.
  • Reaction: Limited or no function of the control software.
  • Solution: Inspect power supply, voltage regulator, and wiring.

2. VTV 000158.04 – Supply Voltage (ELX) Too Low

  • Description: Supply voltage below 9V.
  • Location: Processor.
  • Reaction: Limited or no function of the control software.
  • Solution: Check power supply, battery health, and wiring.

3. VTV 000441.00 – Display Temperature Too High

  • Description: Display temperature above 90°C (194°F).
  • Location: CommandCenter™ display.
  • Reaction: Limited or no function of the control software.
  • Solution: Allow display to cool, improve ventilation, and check the cooling system.

4. VTV 000441.01 – Display Temperature Too Low

  • Description: Display temperature below -30°C (-22°F).
  • Location: CommandCenter™ display.
  • Reaction: Limited or no function of the control software.
  • Solution: Increase cab temperature and inspect heating elements.

5. VTV 524055.20 – Less than 20% of Internal Memory Free

  • Description: Internal memory usage exceeds 80%.
  • Location: Processor.
  • Reaction: Limited or no function of the control software.
  • Solution: Free up memory space, check for memory leaks, and monitor memory usage.

John Deere VTV Diagnostic Trouble Codes List

The John Deere VTV diagnostic trouble codes list provides essential information for identifying and resolving issues within the VTI control software. By understanding and addressing these codes, operators can ensure optimal performance and longevity of their equipment.

Understanding the CommandCenter™ Display

The CommandCenter™ allows users to monitor and adjust various tractor functions. It displays the area and distance covered, and features a USB port and ports for two cameras. Proper functionality of the CommandCenter™ is crucial for efficient tractor operation.

By regularly consulting the John Deere VTV error codes list and addressing any issues promptly, operators can maintain their equipment’s performance and avoid costly downtime.