This error code indicates that a fault occurred when the software was launched. This could be due to corrupted software, incorrect installation, or hardware issues preventing the software from initializing correctly.

READ MORE

This error code indicates an error when reading the internal module (EEPROM). The EEPROM is used for storing essential configuration data and settings for the control software. An error in reading this module can disrupt the operation of the software.

READ MORE

This diagnostic code is triggered when the steering control valve has an invalid calibration or has not yet been calibrated. Proper calibration of the steering control valve is essential for accurate steering control.

READ MORE

This error code is generated if the steering angle sensor has an invalid calibration or has not yet been calibrated. Accurate calibration of the steering angle sensor is crucial for proper steering system operation.

READ MORE

This error code indicates a fault in the steering system. It suggests that other diagnostic trouble codes need to be processed first to identify and resolve the underlying issues affecting the control software.

READ MORE

This error code indicates an identification problem, suggesting that the control software may be connected to the wrong wiring harness or programmed incorrectly. This mismatch can lead to functionality issues and improper operation.

READ MORE

This error code indicates a data transfer problem between the XSC control software and the XMC control software. This problem could be due to issues in the CAN Bus or the transmitting control software, affecting communication and functionality.

READ MORE

This error code is generated if the current in the supply line of the steering control valve (steer left) is too low, indicating that the circuit is open. An open circuit prevents the valve from receiving the necessary electrical signals…

READ MORE

This error code indicates that the current in the supply line of the steering control valve (steer left) is too high, suggesting a short to ground. Such high current can impair the valve’s ability to function properly and affect steering…

READ MORE

This error code indicates that the current at the steering control valve (steer left) is too high, suggesting a short to ground at either the supply or return line of the steering control valve. Such high current can cause the…

READ MORE

This error code is generated if the control software registers that the current at the steering control valve (steer left) is too low, indicating that the circuit is open. An open circuit prevents the valve from receiving the necessary electrical…

READ MORE