Description:

This error code, EPC 000177.16, indicates that the transmission oil temperature is high, specifically between 101°C (214°F) and 105°C (221°F). Prolonged exposure to these temperatures can lead to overheating and potential damage to the transmission system.

Reaction:

When this error is detected, the control system may reduce the transmission’s operational capacity to prevent further temperature increases, leading to reduced performance and efficiency.

Recommendations:

Check Cooling System:

• Inspect the transmission cooling system, including the radiator, cooling fan, and coolant levels. Ensure all components are functioning correctly and coolant levels are adequate.

Inspect Transmission Oil Level:

• Verify that the transmission oil level is within the recommended range. Top up the oil if necessary.

Examine Oil Quality:

• Check the condition of the transmission oil. If the oil is degraded or contaminated, replace it with new oil according to the manufacturer’s specifications.

Inspect Oil Filter:

• Ensure that the transmission oil filter is not clogged or restricted. Replace the filter if necessary.

Monitor Operating Conditions:

• Avoid operating the tractor under extreme conditions that could lead to overheating, such as heavy loads or high ambient temperatures.

Reset and Test System:

• After addressing the above issues, reset the system and monitor the transmission oil temperature to ensure it remains within the normal operating range.

Note:

Regular maintenance of the transmission cooling system and monitoring oil levels and quality are crucial to prevent overheating and ensure the longevity of the transmission components.