Description:

This error code, EPC 002408.19, indicates that the BCU control unit has transmitted an incorrect CAN BUS message regarding the rear PTO engagement. This can occur due to:

• The rear PTO switch being incorrectly configured.
• A faulty sensor signal, indicating a circuit problem at the rear PTO switch.

Reaction:

When this error is detected, the rear PTO may not engage correctly, leading to potential operational issues with the PTO-driven equipment.

Recommendations:

Verify Rear PTO Switch Configuration:

• Check the configuration settings of the rear PTO switch in the BCU. Ensure that the switch is correctly configured and recognized by the control unit.

Inspect Rear PTO Switch Circuit:

• Inspect the wiring and connections of the rear PTO switch for any signs of damage, loose connections, or corrosion. Repair or replace as necessary.

Test Rear PTO Switch:

• Use diagnostic tools to test the rear PTO switch for proper functionality. Replace the switch if it is found to be faulty.

Check CAN BUS Communication:

• Inspect the CAN BUS wiring and connections for any issues that might be causing incorrect messages. Ensure proper signal transmission without interference.

Reset and Test System:

• After addressing the issues, reset the system and monitor the rear PTO engagement to ensure it is operating correctly.

Note:

Regular maintenance and inspection of the rear PTO switch and its associated wiring are crucial for reliable operation. Ensuring accurate CAN BUS communication is essential for correct PTO engagement.