HCC 001873.13 – HCC Calibration Fault/Rear Hitch Position Sensor Circuit
HCC 001873.13 (HCC 1873.13)
Code: 001873.13
Shortcode: 1873.13
Description:
This error code indicates that the Rear Hitch Position Sensor requires calibration. It may be caused by a failure to calibrate or an unsuccessful calibration process, resulting in this code being stored.
Reaction:
The HCC function is degraded when this error code is active.
Recommendations:
- Perform Calibration:
- Calibrate the Rear Hitch Position Sensor following the manufacturer’s instructions.
- Verify Calibration Procedure:
- Ensure that the calibration procedure is executed correctly and that all steps are followed precisely.
- Inspect Sensor and Wiring:
- Check the sensor and its wiring for any signs of damage, loose connections, or corrosion.
- Recalibrate if Necessary:
- If an initial calibration attempt fails, repeat the calibration process to ensure it is successful.
- Consult Technical Support:
- If the issue persists after recalibration, contact technical support for further diagnostics and troubleshooting.
Note:
Proper calibration is essential for accurate hitch control. Regularly check and calibrate the sensor to maintain optimal performance.