PL1 523960.31 – INFORMATION FOR OPERATOR: Operator Not Seated When Reverse Drive Lever Was Actuated
PL1 523960.31 (PL1 )
Code: 523960.31
Shortcode:
Description:
This informational code is generated when a forward or reverse position is selected without a valid operator presence signal. This indicates that the operator was not seated when the reverse drive lever was actuated.
Reaction:
No direct impact on functionality, but the operator must ensure proper seating before actuating the lever.
Recommendations:
- Operator Instructions:
- Ensure the operator is aware of the requirement to be seated when selecting a forward or reverse position.
- Check Operator Presence System:
- Verify that the operator presence detection system is functioning correctly.
- Repair or replace any faulty sensors or components in the operator presence system.
- Consult Technical Support:
- If the issue persists, seek assistance from technical support for further diagnosis and resolution.
Note:
Ensuring the operator is properly seated when operating the reverse drive lever enhances safety and prevents accidental movements.