Description:

This error code is triggered when the supply voltage (BAT) drops below 9 V. This undervoltage condition can impair or completely halt the functioning of the control software.

Reaction:

When this code is detected, the control software may exhibit limited or no functionality.

Recommendations:

• Inspect Power Supply:
  • Ensure the power supply is providing sufficient voltage.
  • Check the voltage regulator for proper operation.
• Examine Wiring and Connections:
  • Look for damaged wires, loose connections, or signs of corrosion.
  • Repair or replace any defective components.
• Check Battery Health:
  • Verify the battery’s condition and charge level.
  • Replace the battery if it is old or unable to hold a charge.
• Avoid Power Drains:
  • Ensure there are no devices or components causing excessive power drain.

Note:

Undervoltage can significantly impact control software performance. Regular maintenance and monitoring of the power supply can prevent these issues.