PTH 523590.14 – Machine Drive Forward Pedal Special Instructions
PTH 523590.14 (PTH )
Code: 523590.14
Shortcode:
Description:
This fault code indicates that the forward pedal sensor connectors are plugged into the wrong location. This can cause incorrect sensor readings and improper operation of the forward pedal.
Reaction:
When this error is detected, the equipment may experience improper or erratic forward pedal response, affecting driving behavior. The system logs the fault and may take corrective actions to prevent unsafe conditions.
Recommendations:
Inspect Forward Pedal Sensor (B11):
- Check the forward pedal sensor for proper operation.
- Ensure the sensor is plugged into the correct connector.
- Verify all electrical connections are secure and free from corrosion.
Inspect Reverse Pedal Sensor (B12):
- Check the reverse pedal sensor to ensure it is correctly connected.
- Verify all electrical connections are secure and free from corrosion.
Test Power Train Hydrostatic Control Unit (PTH):
- Perform diagnostic tests on the control unit to identify any faults.
- Ensure all electrical connections to the control unit are secure and free from corrosion.
Correct Connector Placement:
- Ensure that the forward and reverse pedal sensors are connected to their respective connectors correctly.
Update Control Software:
- Ensure the control unit software is up-to-date with the latest fixes and improvements.
Consult Technical Support:
- If the issue persists, contact technical support for further diagnostics and assistance.
Monitor System Performance:
- After addressing the issue, monitor the forward and reverse pedal systems to ensure normal operation and that the fault does not reappear.
Note:
Regular inspection of sensor connections and maintenance of the associated wiring can prevent this fault. Ensuring proper connector placement during setup and routine maintenance is crucial for reliable operation.