PTR 524254.04 – Transmission Enable Valve Power Low

PTR 524254.04 (PTR )

Code: 524254.04



This error code, PTR 524254.04, indicates that the Power Train Reverser (PTR) control unit has detected that the transmission enable signal voltage is below normal or shorted to a low source. This can occur due to wiring issues, sensor faults, or problems within the control circuitry.


When this error is detected, the PTR control unit may disable the transmission enable valve functionality to prevent potential damage or unsafe operation. The system may also display a warning message to alert the operator.


Inspect Enable Valve:

  • Check the transmission enable valve for proper operation.
  • Ensure the valve is not damaged or malfunctioning. Replace if necessary.

Check Wiring and Connections:

  • Inspect the wiring and connectors related to the transmission enable valve.
  • Ensure all connections are secure and free from corrosion, damage, or short circuits.

Test Circuitry:

  • Use a multimeter to test the circuitry for the transmission enable signal.
  • Ensure there are no short circuits to a low voltage source causing the issue.

Examine Control Unit:

  • Verify that the PTR control unit is functioning correctly.
  • Check for any diagnostic trouble codes in the control unit that might relate to the transmission enable signal.

Update Software:

  • Ensure that the PTR control unit software is up-to-date.
  • Apply any available software updates or patches from the manufacturer.

Monitor Valve Operation:

  • After addressing the issue, monitor the transmission enable valve operation during use.
  • Ensure that the valve functions as intended and the signal voltage is within the normal range.


Proper functioning of the transmission enable valve is crucial for the transmission’s performance. Regular inspection and maintenance of the valve and related components can help prevent such issues.

Control Units: John Deere

John Deere Parts
John Deere Logo