RLC 002368.06 – Left Turn-Signal Light on Front, Current Too High

RLC 002368.06 (RLC 2368.06)

Code: 002368.06

Shortcode: 2368.06


This diagnostic trouble code is generated if the control software registers that the current at the output to the left turn-signal light on the front is too high. This indicates a short circuit to ground.


When this error is detected, the control software may experience limited or no functionality of the front left turn signal light.


  • Inspect Turn Signal Circuit:
    • Check the wiring and connectors associated with the left front turn-signal light for signs of short circuits to ground. Look for damaged insulation or exposed wires. Repair or replace any compromised wiring.
  • Test Turn Signal Light:
    • Test the left front turn-signal light to ensure it is not damaged or causing excessive current draw. Replace any faulty light components.
  • Verify Power Supply:
    • Ensure the power supply to the turn signal light is stable and within the specified range. Inspect for any issues that could cause an overcurrent condition.


Excessive current can damage the turn-signal light and associated circuitry. Regular inspection and maintenance of the electrical system are essential to prevent such issues.

Control Units: John Deere

John Deere Parts
John Deere Logo