RLC 002382.03 – Clearance Lights on Cab Frame, Voltage Too High

RLC 002382.03 (RLC 2382.03)

Code: 002382.03

Shortcode: 2382.03


This diagnostic trouble code is generated if a voltage higher than 16 volts is registered at the output to the clearance lights on the cab frame. This indicates a short circuit to a positive lead.


When this error is detected, the control software may experience limited or no functionality of the clearance lights on the cab frame.


  • Inspect Clearance Light Circuit:
    • Check the wiring and connectors associated with the clearance lights on the cab frame for signs of short circuits to a positive lead. Look for damaged insulation or exposed wires. Repair or replace any compromised wiring.
  • Verify Voltage Regulation:
    • Ensure the voltage regulator is functioning correctly and maintaining proper voltage levels. Replace the regulator if it is faulty.
  • Test Clearance Lights:
    • Test the clearance lights to ensure they are not damaged or causing the voltage increase. Replace any faulty light components.
  • Check Power Supply:
    • Ensure the power supply to the clearance lights is stable and within the specified range. Inspect for any issues that could cause an overvoltage condition.


Excessive voltage can damage the clearance lights and associated circuitry. Regular inspection and maintenance of the electrical system are essential to prevent such issues.

Control Units: John Deere

John Deere Parts
John Deere Logo