Description:

This diagnostic trouble code, RPT 523806.11, is generated when there is a circuit fault in the solenoid for PTO speed 3. This could be due to a shorted circuit, open circuit, or overheating of the solenoid.

Reaction:

When this error is detected, the functionality of the rear PTO is significantly limited or entirely non-functional.

Recommendations:

Inspect Solenoid Circuit:

• Check the wiring and connections for the solenoid circuit for signs of a short, open circuit, or overheating.
• Repair or replace any damaged wires or connectors.

Test Solenoid Operation:

• Use diagnostic tools to test the solenoid for proper operation.
• Replace the solenoid if it is found to be faulty or overheating.

Verify Current and Voltage Levels:

• Measure the current and voltage levels at the solenoid for PTO speed 3 to ensure they are within the specified range.
• Address any issues related to improper current or voltage levels.

Update Control Software:

• Ensure that the PAP control software is updated to the latest version.
• Apply any available patches or updates that address circuit fault issues.

Consult Technical Support:

• If the problem persists, consult with technical support or the equipment manufacturer for further assistance.
• Provide detailed error logs and diagnostic reports to aid in troubleshooting.

Note:

Circuit faults in the solenoid for PTO speed 3 can cause significant issues with the PTO system. Regular inspections and maintenance of the electrical components can help prevent such problems.