RPT 523811.04 – Solenoid for PTO Speed 1 On, Current Too High at PAP Control Software

RPT 523811.04 (RPT )

Code: 523811.04

Shortcode:

Description:

This diagnostic trouble code, RPT 523811.04, is generated when the PAP control software measures a current above 30 A when the solenoid for PTO speed 1 is turned on. This indicates a grounded circuit.

Reaction:

When this error is detected, the functionality of the rear PTO is significantly limited or entirely non-functional.

Recommendations:

Inspect Solenoid Circuit:

  • Check the wiring and connections for the solenoid circuit for signs of a grounded circuit.
  • Repair or replace any damaged wires or connectors.

Test Current Levels:

  • Use diagnostic tools to measure the current levels at the solenoid for PTO speed 1.
  • Ensure the current is within the specified range when the solenoid is activated.

Verify Solenoid Operation:

  • Test the solenoid for proper operation and ensure it is not drawing excessive current.
  • Replace the solenoid if it is found to be faulty.

Update Control Software:

  • Ensure that the PAP control software is updated to the latest version.
  • Apply any available patches or updates that address current regulation issues.

Consult Technical Support:

  • If the problem persists, consult with technical support or the equipment manufacturer for further assistance.
  • Provide detailed error logs and current measurements to aid in troubleshooting.

Note:

High current levels can cause significant damage to the solenoids and the PTO system. Regular inspections and maintenance of the electrical components can help prevent such issues.


Control Units: John Deere

John Deere Parts
John Deere Logo