SCC 524103.19 – SCV IV Control Lever Fault Message Received

SCC 524103.19 (SCC )

Code: 524103.19



This error code indicates that the SCV IV (Selective Control Valve IV) lever position data has been received via CAN message with a failure indication. This could be due to a faulty lever sensor, communication issues, or data corruption.


When this code is detected, the SCC will disable the functions related to SCV IV to prevent further issues.


Inspect SCV IV Control Lever:

  • Verify the functionality of the SCV IV control lever sensor. Replace the sensor if it is found to be faulty.

Check Wiring and Connectors:

  • Inspect all wiring and connectors associated with the SCV IV control lever for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Monitor CAN Messages:

  • Use diagnostic tools to monitor CAN messages from the SCV IV control lever to the SCC, ensuring they are being received without faults.

Update Firmware and Software:

  • Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

  • If the issue persists, contact technical support for further diagnostics and assistance.


Accurate lever position data is essential for precise control. Regular maintenance and testing can help prevent lever faults.

Control Units: John Deere

John Deere Parts
John Deere Logo