Description:

This error code, SCO 000190.02, indicates that the engine speed is too low during the front hitch calibration process. Adequate engine speed is required to perform accurate calibration.

Reaction:

When this fault is detected, the calibration process may be incomplete or inaccurate, leading to limited or improper function of the front hitch.

Recommendations:

• Increase Engine Speed:
  • Ensure the engine is running at the recommended speed during the calibration process. Refer to the operator’s manual for the specific engine speed requirements.
• Monitor Engine Performance:
  • Verify that the engine is performing optimally and maintaining the required speed throughout the calibration.

Note:

Calibration Accuracy:

• Accurate calibration is critical for the proper operation of the front hitch. Ensure that all calibration conditions, including engine speed, are met.