Description:

This error code, SCO 000926.04, indicates that the voltage at the stepper motor input for E-SCV XIII has fallen below 9 volts. This condition suggests a potential short to ground, which can prevent the stepper motor from operating correctly.

Reaction:

When this fault is detected, the control software will have limited or no function of the selective control valve (E-SCV XIII).

Recommendations:

• Inspect Wiring for Shorts:
  • Check the wiring and connections to the stepper motor for any signs of shorts to ground. Repair or replace any damaged wires.
• Verify Power Supply:
  • Ensure that the power supply to the stepper motor is stable and within the required voltage range. Replace the power supply components if necessary.
• Check Electrical Connections:
  • Inspect all electrical connections for corrosion, looseness, or damage. Clean and secure connections as needed.
• Monitor Voltage:
  • Continuously monitor the voltage at the stepper motor input to ensure it stays within the recommended range.

Note:

• Preventive Maintenance:
  • Regular inspections of the electrical system can help identify and address potential shorts before they cause operational issues.