Description:

This error code, SCO 002175.09, indicates a data transfer problem between the SCO control software and E-SCV XV. This issue suggests a problem in the CAN Bus or in the transmitting control software.

Reaction:

When this fault is detected, the control software may have limited functionality or may cease to function altogether, resulting in limited or no function of the selective control valve (E-SCV XV).

Recommendations:

• Inspect CAN Bus Wiring:
  • Check all CAN Bus wiring for signs of damage, loose connections, or corrosion. Secure and repair any issues found.
• Verify E-SCV XV Control Unit:
  • Ensure that the E-SCV XV control unit is functioning correctly. Recalibrate or replace the unit if necessary.
• Test CAN Bus Communication:
  • Test the CAN Bus network for proper communication and address any faults detected.
• Consult Technical Support:
  • If the issue persists, consult technical support for further diagnostics and assistance.

Note:

• Intermittent Issues:
  • Intermittent reception can be difficult to diagnose. Regular monitoring and thorough inspection of the CAN Bus system are recommended.