Description:

This error code, SCO 002602.02, indicates that the hydraulic oil level is too low. Adequate hydraulic oil level is necessary for the proper operation of the selective control valves.

Reaction:

When this fault is detected, the control software may have limited functionality or may cease to function altogether, affecting the selective control valves.

Recommendations:

• Check Hydraulic Oil Level:
  • Verify the hydraulic oil level and add oil if necessary to reach the proper level.
• Inspect for Leaks:
  • Check for any leaks in the hydraulic system and repair any leaks found.
• Verify Sensor Function:
  • Ensure that the hydraulic oil level sensor is functioning correctly. Replace the sensor if necessary.
• Monitor Oil Usage:
  • Continuously monitor the hydraulic oil level to ensure it stays within the recommended range.

Note:

Regular Maintenance:

• Regularly check and maintain the hydraulic oil level to prevent operational issues and ensure the proper functioning of the selective control valves.