SCO 002602.14 – Hydraulic Oil Level Sensor, Oil Level Too Low (No Operator Presence Signal Detected)

SCO 002602.14 (SCO 2602.14)

Code: 002602.14

Shortcode: 2602.14

Description:

This error code, SCO 002602.14, indicates that the hydraulic oil level is very low while no operator presence signal is detected. This condition can lead to the complete inoperability of the selective control valves.

Reaction:

When this fault is detected, the control software will disable the function of the selective control valves to prevent potential damage or unsafe operation.

Recommendations:

  • Check Hydraulic Oil Level:
    • Verify the hydraulic oil level and add oil if necessary to reach the proper level.
  • Inspect for Leaks:
    • Check for any leaks in the hydraulic system and repair any leaks found.
  • Verify Sensor and Operator Presence Signal:
    • Ensure that the hydraulic oil level sensor and the operator presence signal system are functioning correctly. Replace sensors or repair the system if necessary.
  • Monitor Oil Usage:
    • Continuously monitor the hydraulic oil level and ensure the operator presence signal is detected during operations.

Note:

Safety Precautions:

  • Always ensure the hydraulic oil level is adequate and the operator presence signal is functional to maintain safe and efficient operation of the equipment.

Control Units: John Deere

John Deere Parts
John Deere Logo