Description:

This error code, SCO 523827.14, indicates a data transfer problem between the SCO control software and E-SCV XIII. This suggests a problem in the CAN Bus or in the transmitting control software.

Reaction:

When this fault is detected, the selective control valve (E-SCV XIII) will not function.

Recommendations:

• Inspect CAN Bus Wiring:
  • Check all CAN Bus wiring for signs of damage, loose connections, or corrosion. Secure and repair any issues found.
• Verify E-SCV XIII:
  • Ensure that the E-SCV XIII is functioning correctly. Recalibrate or replace the unit if necessary.
• Test CAN Bus Communication:
  • Test the CAN Bus network for proper communication and address any faults detected.
• Consult Technical Support:
  • If the issue persists, consult technical support for further diagnostics and assistance.

Note:

Intermittent Issues:

• Intermittent data transfer problems can be difficult to diagnose. Regular monitoring and thorough inspection of the CAN Bus system are recommended.