SV6 002034.09 – SCC Message Missing
SV6 002034.09 (SV6 2034.09)
Code: 002034.09
Shortcode: 2034.09
Description:
This error code indicates that the Selective Control Valve Unit VI (SV VI) is not receiving the required messages from the SCC (Selective Control Communication). This issue can be due to communication faults, such as wiring issues, faulty modules, or software problems.
Reaction:
When this error code is detected, the system will log the fault and may display a warning on the operator’s console. The operation of the Selective Control Valve Unit VI may be affected, potentially leading to limited or no functionality.
Recommendations:
Inspect Communication Lines:
- Check the CAN bus wiring and connectors between the SCC and SV VI for signs of damage, corrosion, or loose connections.
- Repair or replace any damaged components.
Check SCC and SV VI Modules:
- Ensure that both the SCC and SV VI modules are functioning correctly.
- If necessary, test the modules using diagnostic tools to confirm their operation.
Update Software:
- Ensure that all control unit software, including the SCC and SV VI, is up-to-date with the latest versions provided by John Deere.
Perform System Diagnostics:
- Use diagnostic tools to check for additional fault codes or issues within the communication network that could be causing the message loss.
Consult Technical Support:
- If the issue persists after performing the above steps, consult John Deere technical support for further assistance.
Monitor System:
- After performing corrective actions, monitor the system to ensure the fault does not reoccur.
Note:
Communication issues can often be intermittent and challenging to diagnose. It is essential to ensure that all software and firmware are up-to-date and that all connections are secure and free of corrosion. Regular system checks and maintenance can help prevent such issues from occurring.