Description:

This diagnostic trouble code (TCU 000161.03) is generated when the control unit detects that the voltage at the signal input of the transmission input speed sensor (lead 6075) is too high. This usually indicates that the sensor’s circuit is either open or shorted to a positive lead.

Reaction:

When this error code is detected, the equipment may not accurately read the transmission input speed, leading to potential performance issues. The system may display warnings and enter a protective mode to prevent further damage.

Recommendations:

1. Inspect the Sensor Circuit:

• Check for Open Circuit: Ensure that the sensor circuit is not open and that all connections are secure.
• Look for Shorts: Inspect the wiring for any signs of shorting to a positive lead.

2. Test the Sensor:

• Verify Voltage: Use a multimeter to check the voltage levels at the sensor input.
• Replace if Necessary: Replace the sensor if it is providing incorrect voltage readings.

3. Examine Wiring and Connectors:

• Inspect Wiring: Check all wiring and connectors associated with the sensor for damage or disconnection.
• Repair or Replace: Repair or replace any faulty wiring or connectors.

4. Check Control Unit:

• Test Control Unit: Ensure that the TCU control unit is functioning correctly and processing sensor signals properly.
• Update Software: Update the control unit software if necessary.

Note:

Regular inspection and maintenance of the sensor and its circuitry are essential to prevent high voltage issues. Ensure all components are in proper working condition and adhere to the manufacturer’s specifications.