Description:

This diagnostic trouble code (DTC) UIC 524173.02 is generated when the control unit detects a mismatch between the output signals of the clutch pedal potentiometer (B65). The voltage at channel 1 (lead 6114) must be double the voltage of channel 2 (lead 6007).

Reaction:

When this error occurs, the control unit may limit the functionality of the clutch system to ensure safe operation and prevent potential damage.

Recommendations:

• Inspect Clutch Pedal Potentiometer:
  • Check the B65 clutch pedal potentiometer for proper operation and ensure the voltage ratio between channel 1 and channel 2 is correct.
• Verify Potentiometer Signals:
  • Confirm that the signals from both channels are within the expected range and maintain the correct ratio.
• Check Wiring and Connections:
  • Inspect all wiring and connectors related to the clutch pedal potentiometer for any signs of damage, corrosion, or loose connections.
• Replace Faulty Components:
  • If the potentiometer or associated wiring is found to be faulty, replace or repair as necessary.
• Consult Technical Support:
  • If the issue persists, contact John Deere technical support for further diagnostics and potential solutions.

Note:

Regular inspection and maintenance of the clutch pedal potentiometer and its associated wiring can help prevent such faults and ensure reliable operation.