Description:

This diagnostic trouble code (DTC) UIC 524173.07 is generated if the control unit detects a constant voltage signal (+0.2 volts) from a lightly applied clutch pedal over a period of at least 10 minutes. This indicates an adjustment error in the clutch pedal.

Reaction:

When this error occurs, the control unit may limit the functionality of the clutch system to ensure safe operation and prevent potential damage.

Recommendations:

• Inspect Clutch Pedal Adjustment:
  • Check the clutch pedal to ensure it is properly adjusted according to the manufacturer’s specifications.
• Verify Potentiometer Signals:
  • Confirm that the signals from the clutch pedal potentiometer are within the expected range and adjust as necessary.
• Check Wiring and Connections:
  • Inspect all wiring and connectors related to the clutch pedal potentiometer for any signs of damage, corrosion, or loose connections.
• Replace Faulty Components:
  • If the potentiometer or associated components are found to be faulty, replace or repair as necessary.
• Consult Technical Support:
  • If the issue persists, contact John Deere technical support for further diagnostics and potential solutions.

Note:

Regular adjustment and maintenance of the clutch pedal can help prevent such errors and ensure reliable operation.