Description:

This diagnostic trouble code is generated when the position of the clutch pedal (transmitted as a CAN message by the TIA control software) does not match the switch position of the clutch pedal switch, which is ascertained via the signal from the clutch pedal potentiometer.

Reaction:

Limited or no function of the control software until the error is corrected, indicating a critical issue with the clutch pedal switch.

Recommendations:

Inspect Clutch Pedal Switch:

• Verify that the clutch pedal switch is properly aligned and functioning correctly.
• Replace the switch if it is found to be faulty.

Check Clutch Pedal Potentiometer:

• Ensure the potentiometer is providing accurate position signals.
• Replace the potentiometer if it is defective.

Examine Wiring and Connectors:

• Inspect the wiring and connectors associated with the clutch pedal switch and potentiometer for signs of damage or disconnection.
• Repair or replace any damaged components.

Verify CAN Message Integrity:

• Check the CAN bus for accurate transmission of clutch pedal position messages.
• Ensure there are no faults or interruptions in the CAN bus communication.

Note:

Regular maintenance and calibration of the clutch pedal switch and potentiometer can help prevent discrepancies in clutch pedal position readings, ensuring smooth vehicle operation.