The error code ACU 524254.31 is triggered when the voltage in the transmission enable circuit is found to be incorrect, either too high or too low, which suggests potential issues with the electrical system controlling the transmission’s operational status.

READ MORE

This error code, ACU 524224.02, occurs when the rear Power Take-Off (PTO) switch fails to distinguish between the ON and OFF positions, registering the same value for both. This malfunction suggests an issue within the switch circuitry that could be…

READ MORE

The error code ACU 524222.02 is triggered when the resume switch circuit in the control system fails to differentiate between the ON and OFF positions, showing the same value for both states. This issue indicates a malfunction within the switch…

READ MORE

Error code ACU 524212.04 indicates that the voltage in the rear hitch control lever sensor circuit is below the expected threshold. Low voltage may be caused by issues such as weak battery performance, poor electrical connections, or a failing sensor,…

READ MORE

The error code ACU 524212.03 is activated when the voltage in the rear hitch control lever sensor circuit is found to be excessively high. This abnormal voltage can indicate electrical malfunctions such as overloads or faults within the sensor or…

READ MORE

This error code, ACU 524212.02, indicates a discrepancy between the rear hitch control lever switch position and the corresponding sensor voltage readings. This conflict suggests a problem with the switch or sensor, which may prevent accurate control of the hitch’s…

READ MORE

This error code, ACU 524105.04, indicates that the voltage in the SCV II (Selective Control Valve II) control lever sensor circuit is lower than the normal operational threshold. Such low voltage may result from issues like poor electrical connections, a…

READ MORE

The error code ACU 524105.03 is triggered when there is an unusually high voltage detected in the sensor circuit of the SCV II (Selective Control Valve II) control lever. High voltage levels could be due to an electrical overload, a…

READ MORE

This error code, ACU 524105.02, occurs when there is a discrepancy between the SCV II (Selective Control Valve II) control lever switch position and the voltage readings from its sensor. Such a conflict can indicate an issue in either the…

READ MORE

This error code, ACU 524104.04, is triggered when the voltage within the SCV III (Selective Control Valve III) control lever sensor circuit falls below the normal operational threshold. Low voltage may be indicative of issues such as insufficient power supply,…

READ MORE

The error code ACU 524104.03 indicates that the voltage in the SCV III (Selective Control Valve III) control lever sensor circuit is abnormally high. This condition could be due to electrical overloads, faulty components, or improper wiring, which can lead…

READ MORE