PL1 codes

John Deere PL1 Fault Codes / John Deere PL1 Diagnostic Trouble Codes / John Deere PL1 Error Codes

John Deere PL1 fault codes are essential for diagnosing issues within the primary level of the power line communication systems. These error codes are crucial for identifying problems in the primary segment, which is responsible for the foundational communication between the vehicle’s key systems. Failures in this segment can disrupt basic operational commands and responses, potentially leading to system-wide malfunctions.

PL1 Error Codes / PL1 Fault Codes

The PL1 control software is a vital component used for activating the park lock solenoid 1 in DirectDrive transmissions. It is integrated into the control unit for gear shifting, playing a critical role in the engagement and disengagement of the park lock. The PL1, along with PL2, PL3, and PL4 control software, monitors and controls various parameters to ensure proper functionality.

Key Functions Monitored by PL1 Control Software

  • Come-home connector position
  • Reverse drive lever position
  • Engine speed
  • Vehicle speed
  • Status of park lock solenoid 1 (DirectDrive transmission)
  • Status of park lock solenoid 2 (DirectDrive transmission)

In come-home mode, additional signals are required:

  • Position of clutch pedal potentiometer
  • Supply voltage (ELX)

Common John Deere PL1 Fault Codes

PL1 000158.03 – Supply Voltage (ELX) Too High

Indicates the control software registers a supply voltage of more than 16 V. This can result from overcharging or voltage regulator issues.

PL1 000158.04 – Supply Voltage (ELX) Too Low

Triggered when the supply voltage is less than 9 V. Common causes include battery issues or alternator problems.

PL1 000237.02 – VIN Information Mismatch

Generated when the VIN from other control units does not match, leading to limited vehicle functionality.

PL1 000629.06 – Control Unit, Current Too High

Detected when the current in the control unit for gear shifting is too high, often indicating a short circuit.

PL1 002071.09 – Incorrect CAN Bus Message from CCU Control Software

Caused by data transfer problems between the CCU and PL1 control software, indicating CAN Bus or transmitting control software issues.

Importance of Addressing PL1 Fault Codes

Prompt identification and resolution of John Deere PL1 diagnostic trouble codes are crucial for maintaining vehicle functionality and preventing potential system-wide failures. Regular maintenance, software updates, and thorough inspections are essential for ensuring the reliability and efficiency of the power line communication systems.

By understanding and addressing these error codes, operators can ensure smoother operations, minimize downtime, and enhance the overall performance of their John Deere equipment.

John Deere Parts
John Deere Logo