Description:

This diagnostic trouble code is generated if a voltage higher than the expected value (12 volts) is registered at the output to the high-beam headlights on the cab frame. This indicates that the circuit is open or shorted to a positive lead.

Reaction:

When this error is detected, the control software may experience limited or no functionality of the high-beam headlights on the cab frame.

Recommendations:

• Inspect Headlight Circuit:
  • Check the wiring and connectors associated with the high-beam headlights on the cab frame for signs of open circuits or shorts to a positive lead. Look for damaged insulation or exposed wires. Repair or replace any compromised wiring.
• Verify Voltage Regulation:
  • Ensure the voltage regulator is functioning correctly and maintaining proper voltage levels. Replace the regulator if it is faulty.
• Test Headlight Components:
  • Test the high-beam headlights to ensure they are not damaged or causing the voltage increase. Replace any faulty headlight components.
• Check Power Supply:
  • Ensure the power supply to the headlights is stable and within the specified range. Inspect for any issues that could cause an overvoltage condition.

Note:

Excessive voltage can damage the headlights and associated circuitry. Regular inspection and maintenance of the electrical system are essential to prevent such issues.