Description:

This error code indicates that the external control message for Selective Control Valve V (SV V) has been missing for longer than 10 seconds. Missing command messages can originate from the Resume Switch, iTEC™, Option Configuration Connector, or Attached Implements.

Reaction:

When this code is detected, the SCC functions will be degraded, impacting overall performance.

Recommendations:

Check External Control Sources:

• Verify the functionality of the Resume Switch, iTEC™, Option Configuration Connector, and any attached implements that may be sending control messages to SV V.

Inspect Wiring and Connectors:

• Check all wiring and connectors associated with SV V for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Monitor Communication:

• Use diagnostic tools to monitor the communication signals from external control sources to SV V, ensuring they are being received consistently.

Update Firmware and Software:

• Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

• If the issue persists, contact technical support for further diagnostics and assistance.

Note:

Reliable communication from external control sources is essential for the accurate and efficient operation of SV V.