Description:

This error code indicates that the voltage for Remote Position Sensor 2 for SVs I—IV is below 0.5 volts, which is lower than the expected range.

Reaction:

When this code is detected, the SCC functions will be degraded, impacting the performance of SVs I—IV.

Recommendations:

Inspect Remote Position Sensor 2:

• Verify the functionality of Remote Position Sensor 2. Replace the sensor if it is found to be faulty.

Check Wiring and Connectors:

• Inspect all wiring and connectors associated with Remote Position Sensor 2 for signs of damage, poor connections, or corrosion. Repair or replace as necessary.

Monitor Sensor Voltage:

• Use diagnostic tools to monitor the voltage from Remote Position Sensor 2, ensuring it stays within the acceptable range.

Update Firmware and Software:

• Ensure all relevant components, including the SCC, have the latest firmware and software updates.

Consult Technical Support:

• If the issue persists, contact technical support for further diagnostics and assistance.

Note:

Maintaining the correct voltage range for sensors is crucial for their accurate operation and data integrity.