Description:

This error code indicates that the Chassis Control Unit (CCU) has detected that the clean oil reservoir is low and is sending this message to the suspended front axle (SFA) control unit. This can be caused by leaks, inadequate oil levels, or issues with the oil level sensor.

Reaction:

When this error code is triggered, the SFA system may reduce performance to prevent damage due to low hydraulic oil levels. This can lead to impaired handling and reduced suspension efficiency.

Recommendations:

• Check Hydraulic Oil Level:
  • Verify the hydraulic oil level in the clean oil reservoir. Top up the oil if necessary.
• Inspect for Leaks:
  • Check the hydraulic system for any signs of leaks. Repair any leaks found in the hoses, connections, or components.
• Test Oil Level Sensor:
  • Inspect and test the oil level sensor to ensure it is functioning correctly. Replace the sensor if it is found to be faulty.
• Verify Oil Quality:
  • Ensure that the hydraulic oil is of the correct type and quality as specified by the manufacturer. Replace the oil if it is contaminated or degraded.
• Monitor Oil Usage:
  • Keep track of hydraulic oil usage to identify any unusual consumption patterns that might indicate underlying issues.

Note:

Maintaining proper hydraulic oil levels and quality is essential for the efficient operation of the SFA system. Regular checks and maintenance can help prevent this issue and ensure optimal performance.