Description:

This error code indicates that the suspension raise valve circuit is experiencing low current. This can be caused by an open circuit or a short to ground on either the high or low side of the drive circuit.

Reaction:

When this error code is triggered, the suspension system may fail to raise, leading to potential handling issues and reduced ride comfort.

Recommendations:

• Inspect Wiring and Connections:
  • Check the wiring and connections for the suspension raise valve circuit for signs of damage, corrosion, or disconnection. Repair or replace any faulty wiring or connectors.
• Test the Raise Valve:
  • Test the suspension raise valve to ensure it is functioning correctly. Replace the valve if it is found to be defective.
• Check for Shorts to Ground:
  • Inspect the circuit for any shorts to ground on both the high and low sides. Repair any shorts found.
• Verify Power Supply:
  • Ensure that the valve is receiving the correct power supply. Check the fuse and relay associated with the circuit and replace them if necessary.
• Consult Technical Support:
  • If the issue persists, consult technical support or the manufacturer for further assistance in diagnosing and resolving the problem.

Note:

Regular inspection and maintenance of valve circuits can help prevent these issues. Ensure all connections are secure and free from corrosion.