Description:

This error code indicates that the suspension lower control valve circuit is experiencing low current. This can be caused by an open circuit or a short to ground on either the high or low side of the drive circuit.

Reaction:

When this error code is triggered, the suspension system may fail to lower, leading to potential handling issues and reduced ride comfort.

Recommendations:

• Inspect Wiring and Connections:
  • Check the wiring and connections for the suspension lower control valve circuit for signs of damage, corrosion, or disconnection. Repair or replace any faulty wiring or connectors.
• Test the Lower Valve:
  • Test the suspension lower control valve to ensure it is functioning correctly. Replace the valve if it is found to be defective.
• Check for Shorts to Ground:
  • Inspect the circuit for any shorts to ground on both the high and low sides. Repair any shorts found.
• Verify Power Supply:
  • Ensure that the valve is receiving the correct power supply. Check the fuse and relay associated with the circuit and replace them if necessary.
• Consult Technical Support:
  • If the issue persists, consult technical support or the manufacturer for further assistance in diagnosing and resolving the problem.

Note:

Regular maintenance and inspection of valve circuits are essential for the proper functioning of the suspension system. Keeping the connections clean and secure can prevent many related issues.