Description:

This error code, SIC 000177.01, is generated when the control unit registers a hydraulic oil temperature of less than 25°C (13°F). The function of the EICV (Electro-Hydraulic Integrated Control Valve) and ESCV (Electro-Hydraulic Section Control Valve) is temperature-dependent, impacting their availability and performance.

Reaction:

• Hydraulic oil temperature below 25°C (13°F): EICV and ESCV functions not available.
• Hydraulic oil temperature between 15°C and 25°C (5°F and 13°F): EICV and ESCV functions not available or impaired.

Recommendations:

• Warm Up Equipment:
  • Allow the equipment to run for a sufficient period to warm up the hydraulic oil to an optimal temperature.
  • Operate the equipment at a low load initially to help increase the hydraulic oil temperature gradually.
• Check Hydraulic System:
  • Ensure that the hydraulic oil is of the correct specification and not degraded or contaminated, as poor-quality oil can affect temperature regulation.
  • Inspect the hydraulic system for any blockages or restrictions that could impede proper oil flow and temperature regulation.
• Use Auxiliary Heating:
  • In colder environments, consider using auxiliary heating systems to pre-warm the hydraulic oil before starting operations.
• Monitor Temperature:
  • Use temperature sensors to monitor the hydraulic oil temperature and ensure it reaches the optimal operating range before engaging full operations.

Note:

Operating with hydraulic oil at low temperatures can impair the performance and longevity of the hydraulic system components. Regular maintenance and checks of the hydraulic system, along with proper warm-up procedures, can prevent such occurrences. If the issue persists, consult technical support for further assistance.