Description:

This error code, SIC 003598.04, is generated when the voltage for functions 4 and 5 of the S64 MultiFunction Lever is too low. The relay of these SIC functions is powered by a SIC output (pin 2K1, lead 7088). This indicates a potential short to ground.

Reaction:

When this error code is detected, functions 4 and 5 of the S64 MultiFunction Lever may not operate correctly or may be completely unavailable. This can result in reduced functionality of the lever’s associated features.

Recommendations:

• Inspect Power Supply Wiring:
  • Check the wiring for the power supply to functions 4 and 5 for any signs of damage, wear, or corrosion. Repair or replace any compromised sections.
• Check for Short Circuits:
  • Use a multimeter to check for short circuits to ground in the wiring associated with pin 2K1, lead 7088.
• Inspect Connectors:
  • Ensure all connectors related to the power supply for functions 4 and 5 are properly seated and free from corrosion or debris.
• Measure Supply Voltage:
  • Use a multimeter to measure the voltage at pin 2K1 to ensure it meets the required specifications.
• Update Software:
  • Ensure that the SIC control unit has the latest firmware and software updates installed.

Note:

Low voltage conditions can lead to operational issues and potential damage to electronic components. Regular monitoring and maintenance of the power supply system can help prevent such issues. If the problem persists, consult technical support for further diagnosis and repair.