SSU 001807.03 – B138 Steering Wheel Position Sensor, Supply Voltage in Channel 1 Too High

SSU 001807.03 (SSU 1807.03)

Code: 001807.03

Shortcode: 1807.03

Description:

This diagnostic trouble code (DTC), SSU 001807.03, is triggered when the power supply for the steering wheel position sensor SID 1 exceeds 5.25 volts for longer than 320 milliseconds. This indicates an overvoltage condition in the steering wheel position sensor’s power supply.

Reaction:

When this error is detected, the steering system may not function correctly, potentially leading to inaccurate steering input and compromised vehicle control.

Recommendations:

Inspect Power Supply:

  • Check the power supply to the steering wheel position sensor SID 1 for proper voltage regulation.
  • Ensure that the voltage does not exceed 5.25 volts.

Verify Sensor Connections:

  • Inspect the wiring and connectors related to the steering wheel position sensor SID 1 for signs of damage, loose connections, or corrosion.
  • Ensure all connections are secure and free from contaminants.

Update Software:

  • Ensure that the software related to the steering system is up-to-date. Apply any available firmware updates to improve system performance and compatibility.

Replace Faulty Components:

  • If the steering wheel position sensor SID 1 or related components are found to be defective, replace them with new, genuine parts.

Consult Technical Support:

  • If the error persists after performing the above steps, consult technical support or the manufacturer for further assistance.

Note:

  • Regular maintenance and inspection of the steering system components can help prevent overvoltage conditions.
  • Ensuring the electrical system is properly regulated can avoid damage to sensitive components.

Control Units: John Deere

John Deere Parts
John Deere Logo