Description:

This diagnostic trouble code (TCU 522379.03) is generated if the control unit detects a short to a positive lead at the signal input of park lock solenoid valve 1 (Y15/1, lead 6047). This indicates an electrical issue causing higher-than-expected voltage at the solenoid valve.

Reaction:

When this error code is detected, the equipment may experience issues with the park lock mechanism, leading to potential performance problems. The system might enter a protective mode to prevent further issues, resulting in limited operational capabilities.

Recommendations:

1. Inspect Solenoid Valve Circuit:

• Check for Shorts: Inspect the wiring for any signs of shorting to a positive lead.
• Ensure Secure Connections: Make sure all connections are secure and free of corrosion.

2. Test the Solenoid Valve:

• Measure Voltage: Use a multimeter to measure the voltage at the signal input of the park lock solenoid valve.
• Replace if Faulty: Replace the solenoid valve if it is providing high voltage readings.

3. Examine Wiring and Connectors:

• Inspect for Damage: Check the wiring and connectors associated with the solenoid valve for damage or disconnection.
• Repair or Replace: Repair or replace any damaged components.

4. Verify Control Unit Functionality:

• Test Control Unit: Ensure that the control unit is correctly processing the solenoid valve signals.
• Update Software: Update the control unit software if necessary.

Note:

Maintaining the solenoid valve and its associated circuitry is crucial for accurate park lock operation. Regular inspections and prompt repairs can help prevent issues related to high voltage readings.