Description:

This diagnostic trouble code (TCU 524170.19) is generated if the UIC control unit is not able to determine the value for park lock condition (IPLS) and so cannot provide the CAN BUS with any relevant data. A transmitted replacement value generates this diagnostic trouble code in the TCU. In its active state, this fault also generates a diagnostic trouble code at the UIC and/or PLC.

Reaction:

When this error code is detected, the equipment may experience issues with park lock condition control, leading to potential performance problems. The system might display warnings or enter a protective mode to prevent further issues.

Recommendations:

1. Inspect UIC Control Unit:

• Verify Operation: Ensure that the UIC control unit is functioning correctly and able to determine the park lock condition.
• Check Connections: Ensure all connections to the UIC control unit are secure and free of corrosion.

2. Verify CAN BUS Communication:

• Check Data Transmission: Ensure that the CAN BUS is transmitting accurate data from the UIC control unit to the TCU.
• Inspect for Errors: Look for any errors or interruptions in the data transmission.

3. Examine Wiring and Connectors:

• Inspect Wiring: Check all wiring and connectors associated with the CAN BUS system for damage or disconnection.
• Repair or Replace: Repair or replace any faulty wiring or connectors.

4. Update Software:

• Update Control Unit Software: Ensure that the UIC and TCU software are up-to-date to prevent communication issues.

Note:

Maintaining reliable CAN BUS communication and accurate park lock condition control is essential for optimal equipment performance. Regular inspections and prompt repairs can help prevent issues related to incorrect CAN BUS messages.