Description:

This diagnostic trouble code (DTC) is issued when no valid information is received from the implement, or if the implement has disabled the automation while the tractor was stationary. This code indicates a communication problem between the tractor and the implement, leading to a disruption in automation functions.

Reaction:

All functions of the Tractor-Implement Automation™ are deactivated.

Recommendations:

Check Implement Connection:

• Ensure that the implement is properly connected to the tractor.
• Inspect the connectors for damage or corrosion and clean or replace them as necessary.

Inspect CAN BUS Wiring and Connections:

• Check the CAN BUS wiring between the tractor and implement for damage, loose connections, or corrosion.
• Repair or replace any damaged wiring or connectors.

Verify Implement Functionality:

• Confirm that the implement is functioning correctly and is compatible with the Tractor-Implement Automation™ system.
• Check for any fault codes or errors on the implement’s control system.

Restart Automation:

• Perform the operator information task (TIA 520283.14) to restart the Tractor-Implement Automation™ system.

Update Control Software:

• Ensure that the control software for both the tractor and the implement is up-to-date with the latest versions from the manufacturers.

Consult Technical Support:

• If the issue persists, consult technical support for further diagnostic procedures or potential hardware issues.

Note:

Regular maintenance and inspection of the connections and wiring between the tractor and implement can prevent communication issues. Ensuring compatibility and proper function of the implement with the Tractor-Implement Automation™ system is crucial for seamless operation.