Description:

This operator information (DTC) is generated when the come-home mode is activated (connector for come-home feature in COME HOME position). It informs the operator that they should move the reverse drive lever to the neutral or park lock position to gain access to the next stage of the come-home function.

Reaction:

The system informs the operator to move the reverse drive lever to the neutral or park lock position to proceed with the come-home mode.

Recommendations:

Move Reverse Drive Lever:

• Follow the instruction to move the reverse drive lever to the neutral or park lock position to proceed with the come-home mode.

Verify Come-Home Mode Activation:

• Ensure the come-home mode connector is correctly set to the COME HOME position.

Inspect Connector and Wiring:

• Check the connector and wiring associated with the come-home feature for damage or disconnections.
• Repair or replace any damaged wiring or connectors.

Consult Operator Manual:

• Refer to the operator manual for detailed instructions on moving the reverse drive lever to the neutral or park lock position during come-home mode activation.

Consult Technical Support:

• If the issue persists, consult technical support for further assistance.

Note:

Proper understanding and usage of the come-home mode feature is essential for safely managing tractor operations during emergency situations. Regular checks of the connector and associated wiring can prevent issues.