Description:

This information for the operator (DTC) is generated when the reverse drive lever is in the forward or reverse position while the tractor is being started or the ignition is being turned on. This serves as a safety precaution to prevent unintended movement.

Reaction:

The engine will not start until the reverse drive lever is moved to the neutral or park position.

Recommendations:

Move Reverse Drive Lever:

• Move the reverse drive lever to the neutral or park position to allow the engine to start.

Check Lever Position Sensors:

• Verify the sensors detecting the position of the reverse drive lever are functioning correctly.
• Replace any faulty sensors.

Inspect Wiring and Connections:

• Check the wiring and connectors associated with the reverse drive lever for damage, corrosion, or loose connections.
• Repair or replace any damaged wiring or connectors.

Update Control Software:

• Ensure the control software is up-to-date with the latest version from the manufacturer.

Consult Technical Support:

• If the issue persists, consult technical support for further diagnostic procedures.

Note:

Regular checks of the reverse drive lever and associated sensors can help prevent this issue. Proper operator training on the correct procedures for engine start and stop is crucial for smooth operation.