TIA 524173.07 – Clutch Pedal Potentiometer, Adjustment Error
TIA 524173.07 (TIA )
Code: 524173.07
Shortcode:
Description:
This diagnostic trouble code (DTC) is generated under the following conditions:
- If the clutch pedal potentiometer is faulty, and the reverse drive lever is in the forward or reverse position while the clutch pedal is depressed.
- If the clutch pedal potentiometer is faulty, and the reverse drive lever is in the forward or reverse position while the enable pressure sensor detects a pressure lower than system pressure.
Reaction:
Limited or no function of the control software, impacting overall vehicle performance.
Recommendations:
Inspect Clutch Pedal Potentiometer:
- Verify the physical condition and operation of the clutch pedal potentiometer.
- Replace the potentiometer if it is faulty or damaged.
Check Reverse Drive Lever Position Sensors:
- Inspect the sensors responsible for detecting the position of the reverse drive lever.
- Ensure the sensors are correctly aligned and calibrated. Replace any faulty sensors.
Inspect Enable Pressure Sensor:
- Verify the operation of the enable pressure sensor. Ensure it is detecting correct pressure levels.
- Replace the sensor if it is providing incorrect readings.
Check Wiring and Connections:
- Inspect the wiring and connectors associated with the clutch pedal potentiometer, reverse drive lever sensors, and enable pressure sensor for damage or disconnections.
- Repair or replace any damaged wiring or connectors.
Update Control Software:
- Ensure the control software is up-to-date to correctly interpret signals from the clutch pedal potentiometer and other sensors.
Consult Technical Support:
- If the issue persists, consult technical support for further diagnostic procedures or potential hardware issues.
Note:
Regular inspection and maintenance of the clutch pedal potentiometer and associated sensors can prevent issues related to adjustment errors. Ensuring the system is properly calibrated is crucial for reliable operation.