TID 002019.09 – Incorrect CAN Bus Message, Information from XSC Control Software
TID 002019.09 (TID 2019.09)
Code: 002019.09
Shortcode: 2019.09
Description:
This error code, TID 002019.09, is generated when there is a data transfer problem between the XSC control software and the TIA control software. The reception of messages sent on the CAN bus by the control software is intermittent or non-existent. This typically indicates an open circuit in the CAN bus line, a short circuit, or faulty CAN bus terminating resistors.
Reaction:
The detection of this error may result in limited or no functionality of the transmission system, affecting the vehicle’s performance and operation.
Recommendations:
- Inspect CAN Bus Wiring: Check the CAN bus wiring for any signs of damage, loose connections, or corrosion. Repair or replace any damaged wiring.
- Check for Open Circuit: Use diagnostic tools to test for an open circuit in the CAN bus line. Ensure all connections are secure and continuous.
- Inspect for Short Circuit: Look for any signs of a short circuit in the CAN bus wiring. Ensure that there are no exposed wires causing a short.
- Verify CAN Bus Terminating Resistors: Check the CAN bus terminating resistors to ensure they are functioning correctly and properly installed. Replace any faulty resistors.
- Update XSC Control Software: Ensure that the XSC control software is up-to-date with the latest version to avoid any software-related communication issues.
Note:
Regular maintenance and inspection of the CAN bus system are crucial for preventing data transfer issues. Ensuring all components are in good condition and properly connected helps maintain reliable communication between control software systems.