Description:

This information for the operator (DTC) UIC 523957.31 is generated if the reverse drive lever is neither in neutral nor corner park while the tractor is being jumpstarted. The following checks must be done only if the diagnostic trouble code has been generated without a jumpstart being performed.

Reaction:

When this informational code is triggered, it serves as a reminder to the operator to ensure the reverse drive lever is in the correct position before starting the tractor, especially during a jumpstart.

Recommendations:

• Move Reverse Drive Lever:
  • Ensure that the reverse drive lever is moved to the neutral or corner park position before attempting to start the tractor.
• Verify Jumpstart Procedure:
  • Confirm that the proper jumpstart procedure is being followed, with the reverse drive lever in the correct position.
• Educate Operator:
  • Inform the operator about the requirement to have the reverse drive lever in the correct position for safe startup of the tractor.
• Check Lever Mechanism:
  • Verify that the reverse drive lever mechanism is functioning correctly and is able to move smoothly between positions.

Note:

This code is primarily informational and serves to remind the operator of proper procedure for starting the tractor, especially during jumpstart situations.