Description:

This diagnostic trouble code is triggered if the Cancel Button remains continuously actuated for more than 60 seconds during initialization (after the ignition has been switched on), or if the button is registered as “actuated” for more than 10 minutes during operation. This indicates that the Cancel Button may be stuck or malfunctioning.

Reaction:

When this code is detected, the equipment may disable the function associated with the Cancel Button to prevent unintended operations. This can affect the performance of the equipment or specific functions controlled by the Cancel Button.

Recommendations:

Inspect Cancel Button:

• Physically inspect the Cancel Button for signs of damage, sticking, or debris that may cause it to remain actuated. Clean or repair the button as necessary.

Test Button Functionality:

• Test the Cancel Button to ensure it functions correctly and returns to its default state after being pressed. Replace the button if it is found to be defective.

Check Wiring and Connections:

• Inspect the wiring and connections associated with the Cancel Button for signs of damage, corrosion, or looseness. Ensure all connections are secure and in good condition.

Reset Control Unit:

• Attempt to reset the control unit by disconnecting the power source for a few minutes and then reconnecting it. This can sometimes clear temporary faults related to button inputs.

Consult Technical Support:

• If the issue persists, consult technical support or the manufacturer for further assistance in diagnosing and resolving the problem with the Cancel Button.

Note:

A defective button can lead to unintended operations or failure of specific functions. Regular inspection and maintenance of control buttons can help prevent such issues.