Description:

This diagnostic trouble code is triggered if an internal memory fault occurs while data is being saved. This indicates a problem within the control unit’s memory, potentially affecting its ability to store and retrieve data correctly.

Reaction:

When this code is detected, the control unit may not function correctly, leading to erratic behavior or complete failure of certain systems. The equipment may enter a limp mode or protective state to prevent further damage.

Recommendations:

Reset Control Unit:

• Attempt to reset the control unit by disconnecting the power source for a few minutes and then reconnecting it. This can sometimes clear temporary memory faults.

Inspect Control Unit Connections:

• Check all connections to the control unit for signs of damage, corrosion, or looseness. Ensure all connections are secure and in good condition.

Update Firmware:

• Ensure the control unit is running the latest firmware. Update the firmware if necessary to improve stability and functionality.

Reprogram or Replace Control Unit:

• If the memory fault persists, consider reprogramming the control unit. If the control unit is damaged, replacement may be necessary.

Consult Technical Support:

• Due to the complexity of internal memory faults, consult technical support or the manufacturer for detailed diagnostic procedures and potential replacement of the control unit.

Note:

Internal memory faults can lead to significant disruptions in equipment operation. Regular updates and maintenance of the control unit firmware and software can help prevent such faults.