Description:

This error code, VLC 002354.06, indicates that the Vehicle Load Center (VLC) control unit has detected that the current in the left/right front outer flood lights circuit exceeds the fuse rating of 10 amps. This suggests a potential short circuit or excessive load in the circuit.

Reaction:

When this fault is detected, the affected front outer flood lights will not operate, and the circuit’s fuse may blow to prevent damage, leading to reduced visibility and illumination around the vehicle.

Recommendations:

Inspect Wiring and Connections:

• Examine the wiring and connectors in the front outer flood light circuit for any signs of short circuits, such as damaged insulation or exposed wires. Repair or replace any faulty wiring or connectors.

Check the Flood Light Bulbs:

• Ensure that the front outer flood light bulbs are not drawing excessive current due to a fault. Replace any bulbs that are found to be faulty.

Test the Relay and Fuse:

• Verify that the relay and fuse for the front outer flood light circuit are correctly rated and not faulty. Replace any blown fuses or malfunctioning relays with the correct ratings.

Measure Circuit Current:

• Use a multimeter to measure the current in the front outer flood light circuit to confirm it exceeds 10 amps. Identify and rectify any sources of excessive current draw.

Consult Technical Support:

• If the problem persists, contact technical support for further diagnostics. Provide detailed information about the fault and the steps taken to resolve it.

Note:

High current in the front outer flood light circuit can be caused by factors such as short circuits, mechanical faults in the bulbs, or incorrect component ratings. Regular maintenance and careful inspection of the electrical system can help prevent such issues.