Description:

This error code is generated when too many CAN messages are received via the vehicle CAN-BUS (500 kBd), indicating a possible defective terminating resistor or other issues within the CAN-BUS network.

Reaction:

When this error is detected, the control software will limit or disable certain functions to prevent data overload and ensure safe operation of the CAN-BUS network.

Recommendations:

Inspect CAN-BUS Network:

• Check the CAN-BUS wiring and connections for any signs of damage, loose connections, or corrosion. Repair or replace as necessary.

Verify Terminating Resistors:

• Inspect the terminating resistors at both ends of the CAN-BUS network. Ensure they are functioning correctly and replace if defective.

Monitor CAN Traffic:

• Use diagnostic tools to monitor CAN-BUS traffic and identify any unusual activity or excessive message frequency.

Update Control Software:

• Ensure that the control software is up-to-date and optimized for handling CAN-BUS communication.

Consult Technical Support:

• If the issue persists, consult technical support for further assistance in diagnosing and resolving the CAN-BUS time-out issue.

Note:

Maintaining the integrity of the CAN-BUS network is crucial for reliable vehicle communication. Regular inspection and maintenance of the CAN-BUS system can help prevent such issues from occurring.