Description:

This error code indicates that the Steering Control Unit (AutoTrac™) is connected to an incompatible harness. Using the wrong harness can lead to improper functioning or complete failure of the AutoTrac™ system.

Reaction:

When this error is detected, the control software will limit or disable certain functions to prevent potential damage and ensure safe operation despite the incompatible harness connection.

Recommendations:

Verify Harness Compatibility:

• Check the part number of the harness connected to the Steering Control Unit and ensure it matches the specifications for the AutoTrac™ system.

Inspect Connections:

• Ensure all connections are secure and correctly aligned. Disconnect and reconnect the harness to verify proper connection.

Replace Incompatible Harness:

• If the harness is determined to be incompatible, replace it with the correct, manufacturer-approved harness.

Consult Technical Support:

• If there is uncertainty about the compatibility of the harness, consult technical support for assistance.

Note:

Using the correct harness is essential for the proper functioning of the AutoTrac™ system. Always verify part numbers and specifications during installation to avoid compatibility issues.